![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-series/smartnode-series_software-configuration-manual_4048643059.webp)
Accessing the SmartWare CLI task list
59
SmartWare Software Configuration Guide
4 • Accessing the CLI
node(cfg)#copy running-config startup-config
Creating an administrator account
Administrators can run the
enable
command and access additional information within the SmartWare config-
uration modes. Therefore administrators can modify the system configuration, as well as view all relevant sys-
tem information.
Creating a new administrator account is described in the following procedure:
Mode:
Operator execution
Example:
Create an administrator account
The following example shows how to add a new administrator account with a login name
super
and a matching
password
Gh3*Ke4h
.
node>enable
node#configure
node(cfg)#administrator super password Gh3*Ke4h
node(cfg)#copy running-config startup-config
Displaying the CLI version
This procedure displays the version of the currently running CLI.
Mode:
Operator execution
Example:
Displaying the CLI version
The following example shows how to display the version of the current running CLI on your device, if you
start from the operator execution mode.
node>show version cli
CLI version : 3.00
Displaying account information
You can use the
show
command to display information about existing administrator and operator accounts.
This command is not available for an operator account.
The following procedure describes how to display account information:
Step
Command
Purpose
1
node
>enable
Enters administration execution mode
2
node#
configure
Enters configuration mode
3
node(cfg)#
administrator
name
password
password
Creates a new administrator account
name
and password
password
4
node(cfg)#
copy running-config startup-config
Permanently stores the new administrator
account parameters.
Step
Command
Purpose
1
node>
show version cli
Displays the CLI version
Содержание SmartNode Series
