manualshive.com logo in svg

Patton electronics SmartNode Series, Руководство по настройке программного обеспечения, Страница: 499 / 655

Поделиться
Скачать
Patton electronics SmartNode Series Скачать руководство пользователя страница 499

Call router configuration task list

499

SmartWare Software Configuration Guide 

40 • Call router configuration

Invalid Message

(Cont.)

call-identity-in-use

Drop original call

This cause indicates that the network has 
received a call suspends request. The call 
suspend request contained a call identity 
which is already in use for a suspended 
call within the domain of interfaces over 
which the call might be resumed.

no-call-suspended

Drop original call

The network receives a call resume request 
when there is not a suspended call pend-
ing. This can be a transient error that will 
be resolved by successive call retries.

call-has-been-cleared

Drop original call

The network receives a call resume 
request. This call resume request contains 
a call identity that once indicated a sus-
pended call. However, the suspended call 
was cleared either by time-out or by the 
remote user.

incompatible-destination Drop original call

Indicates that an attempt is made to con-
nect incompatible equipment.

invalid-transit-network

Drop original call

This cause indicates that a transit network 
identification of an incorrect format was 
received.

invalid-message

Drop original call

Received an invalid message with no stan-
dard cause.

Protocol Error

mandatory-ie-missing

Drop original call

The receiving equipment receives a 
message that does not include one of the 
mandatory information elements. This 
cause indicates that the equipment 
sending this cause has received a 
message that is missing a call property 
that must be present in the message before 
that message can be processed.

message-type-not-imple-
mented

Drop original call

The receiving equipment receives an 
unrecognized message, because the mes-
sage type is invalid or the message type is 
valid but not supported.

message-type-not-state-
compatible

Drop original call

The remote equipment receives an invalid 
message with no standard cause. This 
cause indicates that the equipment send-
ing this cause has received a message 
such that the procedures do not indicate 
that this is a permissible message to 
receive while in the current call state.

Table 21. Hunt group drop causes (Continued)

Class

Cause

Default Behavior 

of the Hunt 

Group Service

Description

Содержание SmartNode Series
















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов