System image handling task list
67
SmartWare Software Configuration Guide
5 • System image handling
Operating configurations cannot be executed from the persistent memory, so the configuration used for oper-
ating the SmartNode is copied into the volatile memory of the SmartNode prior to normal operation. This
procedure takes place after the system bootstrap, where the application image (i.e. SmartWare) is started and a
configuration must be available. Shortly before SmartWare has completed all startup processes, the configura-
tion
startup-config
is copied from
nvram:
in persistent memory to the
running-config
configuration in system: in
volatile memory.
You can back up the
running-config
to
nvram:
or to a remote TFTP server with a user-defined name.
Note
When returning to the
factory-config
by using the
copy factory-config star-
tup-config
command, all user-specific configurations saved in
nvram:
remain even after
reload
.
Figure 8. SmartNode memory regions logically defined in SmartWare
System image handling task list
To load and maintain system images, perform the tasks described in the following sections:
•
Displaying system image information
•
Copying system images from a network server to the Flash memory (see
page 68
)
•
Copying the driver software from a network server to the Flash memory (see
page 70
)
Volatile
Persistent
nvram :
• Factory
Configuration
“factory-config”
(read-only)
• Startup
Configuration
“startup-config”
• User specific
Configuration
“user-config”
system:
• current Running
Configuration
“running-config”
tftp:
• Configuration
Files
• Batchfiles for
System Image
download
flash:
• Application Image
• Bootloader Image
• Microcode Image
Memory Regions in
Embedded Software
Storing the current Configuration locally
Configuration File Upload
Storing the current Running Configuration remotely
Remote
(TFTP Server)
Local
Image / Microcode Download
Configuration File Download
Only on Startup to execute the
Startup or Factory Configuration
Содержание SmartNode Series
