Accessing the SmartWare CLI task list
62
SmartWare Software Configuration Guide
4 • Accessing the CLI
of the list. Also, you can change a commands position in a listing (moving it up or down in the list) by chang-
ing its index number.
Example 1:
Moving the G.723 codec from position
3
in the list to position
1
at the top of the list.
Listing before changing the G.723 codec index number:
profile voip default
codec 1 g711ulaw64k rx-length 20 tx-length 20
codec 2 g711alaw64k rx-length 20 tx-length 20
codec 3 g723-6k3 rx-length 30 tx-length 30
dejitter-max-delay 200
...
Listing after changing index number:
192.168.1.1(pf-voip)[default]#
codec 3 before 1
192.168.1.1(pf-voip)[default]#
show running-config
...
profile voip default
codec 1 g723-6k3 rx-length 30 tx-length 30
codec 2 g711ulaw64k rx-length 20 tx-length 20
codec 3 g711alaw64k rx-length 20 tx-length 20
dejitter-max-delay 200
...
Note
Succeeding indexes are automatically renumbered.
Example 2:
Moving the G.723 codec back position 3
This command moves the G.723 codec from the top to third place. As a result, the other two codecs move up
in the list as their indexes are automatically renumbered to accommodate the new third-place codec.
192.168.1.1(pf-voip)[default]#
codec 1 after 3
192.168.1.1(pf-voip)[default]#
show running-config
...
profile voip default
codec 1 g711ulaw64k rx-length 20 tx-length 20
codec 2 g711alaw64k rx-length 20 tx-length 20
codec 3 g723-6k3 rx-length 30 tx-length 30
dejitter-max-delay 200
...
Example 3:
Inserting a codec at a specific position in the list.
This command assigns the G.729 codec the index number 1 so the codec appears at the top of the list.
192.168.1.1(pf-voip)[default]#
codec 1 g729 tx-length 30 rx-length 30 silence-
supression
192.168.1.1(pf-voip)[default]#
show running-config
...
profile voip default
codec 1 g729 rx-length 30 tx-length 30 silence-supression
codec 2 g711ulaw64k rx-length 20 tx-length 20
codec 3 g711alaw64k rx-length 20 tx-length 20
codec 4 g723-6k3 rx-length 30 tx-length 30
dejitter-max-delay 200
...
Содержание SmartNode Series
