![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-series/smartnode-series_software-configuration-manual_4048643322.webp)
PPP configuration task list
322
SmartWare Software Configuration Guide
30 • PPP configuration
Displaying PPP configuration information
This section shows how to display and verify the PPP configuration information.
Mode:
Configure
Example:
Display PPP subscriber configuration information
node(session)[green]#show subscriber ppp joe_example
Subscribers:
------------
Name: joe_example
Direction: dial-out
Authentication: pap
Identification (inbound): (none)
Identification (outbound): patton/patton
Timeout for disconnect: no absolute timeout, no idle timeout
Max. sessions: no limit
IP address: (none)
Callback: (none)
Binding: interface ppp_interface router
Binding: interface ppp_interface router
Step
Command
Purpose
1
node
(cfg) #show running-config
Gives the best overview of all PPP related configura-
tion information. The following parts are of interest:
•
profile ppp default
•
profile ppp
name
•
interface
name
•
subscriber ppp
name
•
port ethernet
slot port
•
session
name
2
node
(cfg) #show subscriber ppp [
name
]
Displays configuration information of the PPP sub-
scriber
name
or of all PPP subscribers
3
node
(pf-ppp)[name]#show profile ppp
{
name
| default }
Displays the PPP profile
name
or the default PPP
profile
Содержание SmartNode Series
