manualshive.com logo in svg

Patton electronics 3095, Справочное руководство администратора, Страница: 153 / 200

Поделиться
Скачать
Patton electronics 3095 Скачать руководство пользователя страница 153

System Log—Modify

151

mDSL DACS Administrators’ Reference Guide 

20 • System Log

System Log—Modify

The 

System Log—Modify

 window (see figure 47) displays 

SysLog

 and 

SNMP Trap Daemon IP Address

 loca-

tions, message priorities for the offered SysLog destinations, priority and maintenance information.

Figure 47. System Log—Modify window

Daemons

This portion of the 

System Log—Modify

 window contains information about the SysLog Daemon and SNMP 

Trap Daemon IP Addresses.

SysLog Daemon IP Address(syslogDaemonIP)

The IP address of a host system which is running a syslog daemon. System messages with a priority greater than 
or equal to the configurable syslogDaemonPriority will be sent to this IP address (see section “Priority”).

SNMP Trap Daemon IP Address (syslogTrapIP)

The IP address of a host system which is running a SNMP trap daemon. SNMP Trap messages with a priority 
greater than or equal to the configurable syslogTrapPriority will be sent to this IP address.

Priority

This portion of the 

System Log—Modify

 window describes the configuration of the Message Priority for each 

of the SysLog destinations.

Содержание 3095









































































































































































































Отзывы:

Нет отзывов