manualshive.com logo in svg

Patton electronics 3095, Справочное руководство администратора, Страница: 135 / 200

Поделиться
Скачать
Patton electronics 3095 Скачать руководство пользователя страница 135

In

133

mDSL DACS Administrators’ Reference Guide 

18 • SNMP

Bad Community Names (snmpInBadCommunityNames)

The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community 
name not known to said entity.

Bad Community Uses (snmpInBadCommunity)

The total number of SNMP messages delivered to the SNMP protocol entity which represented an SNMP 
operation which was not allowed by the SNMP community named in the message.

ASN ParseErrors (snmpInASNParseErrs)

The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received 
SNMP messages.

Error Status “Too Big” (snmpInTooBigs)

The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of 
the error-status field is 

tooBig

.

No Such Names (snmpInNoSuchNames)

The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of 
the error-status field is 

noSuchName

.

Bad Values (snmpInBadValues)

The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of 
the error-status field is 

badValue

.

Error Status “Read Only” (snmpInReadOnlys)

The total number of valid SNMP PDUs that were delivered to the SNMP protocol entity and for which the 
value of the error-status field is 

readOnly

. It should be noted that it is a protocol error to generate an SNMP 

PDU which contains the readOnly value in the error-status field, as such this object is provided as a means of 
detecting incorrect implementations of the SNMP.

Generated Errors (snmpInGenErrs)

The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of 
the error-status field is 

genErr

.

Get/Get Next Variables (snmpInTotalReqVars)

The total number of MIB objects that have been retrieved successfully by the SNMP protocol entity as the 
result of receiving valid SNMP Get-Request and Get-Next PDUs.

Set Variables (snmpInTotalSetVars)

The total number of MIB objects that have been altered successfully by the SNMP protocol entity as the result 
of receiving valid SNMP Set-Request PDUs.

Get Requests (snmpInGetRequests)

The total number of SNMP Get-Request PDUs that have been accepted and processed by the SNMP protocol 
entity.

Содержание 3095









































































































































































































Отзывы:

Нет отзывов