manualshive.com logo in svg

Patton electronics 3095, Справочное руководство администратора, Страница: 134 / 200

Поделиться
Скачать
Patton electronics 3095 Скачать руководство пользователя страница 134

18 • SNMP

mDSL DACS Administrators’ Reference Guide

132

Introduction

Introduction

The DACS provides management and statistical information on SNMP. Detailed information on the SNMP 
MIB variables may be downloaded from the RFC. Click on 

SNMP

 under the 

Configuration Menu

 to dis-

play the SNMP window (see figure 42).

Figure 42. SNMP window

SNMP window

The 

SNMP

 window displays incoming and outgoing SNMP statistics, and has links for downloading and dis-

playing the following MIB documents:

•

Corporate MIB

•

Enterprise MIB

•

Product MIB

In

Packets (snmpInPkts)

The total number of Messages delivered to the SNMP entity from the transport service. Typically this would be 
UDP since the SNMP engine sits on top of UDP

Bad Version (snmpInBadVersions)

The total number of SNMP Messages that were delivered to the SNMP protocol entity and were for an unsup-
ported SNMP version.

Содержание 3095









































































































































































































Отзывы:

Нет отзывов