manualshive.com logo in svg

Patton electronics 3095, Справочное руководство администратора, Страница: 145 / 200

Поделиться
Скачать
Patton electronics 3095 Скачать руководство пользователя страница 145

System main window

143

mDSL DACS Administrators’ Reference Guide 

19 • System

Running Since Last Boot (sysUpTime)

This SNMP variable represents the time since the network management portion of the system was last re-ini-
tialized (see figure 43 on page 139).

System Manager (sysContact)

This SNMP variable represents the textual identification of the contact person for this managed node, which 
may include information on how to contact this person as defined by specification RFC1213.MIB (see 
figure 43 on page 139).

 

The maximum length of this field is 256 octets.

Box Name (sysName)

This is “An administratively assigned name for this managed node. By convention, this is the node’s fully-qual-
ified domain name.” (RFC1213.MIB) (see figure 43 on page 139).

Physical Location (sysLocation)

“The physical location of this node (e.g., 

telephone closet, 3rd floor

).” (RFC1213.MIB) (see figure 43 on 

page 139).

Web Settings (boxBackgroundFlag)

The following options are available:

•

disableGraphics(0)—When this option is selected, graphics on WWW pages will not be displayed. This 
results in faster page display times, but may make it more difficult to navigate WWW sites that rely heavily 
on graphics.

•

enableGraphics(1)—When this option is selected, graphics on WWW pages are displayed.

•

disableWeb(2)—When this option is selected, access to the WWW pages is denied for everyone.

Monitor Privilege (boxMonitorPrivilege)

Specifies the privileges given to the monitor user. Privileges can be removed or additional write access can be 
given beyond read-only access. The following options are available:

•

none(0)—The monitor user can not log in.

•

read-only(2)—This is the default setting. The monitor user can view but not change any parameters. Mon-
itor can not view passwords.

•

writeUser(18)—Not supported.

•

writeUserlp(50)—The monitor user can change all parameters—except passwords— IP links.

•

writeUserlpWan(114)—The monitor user can change all parameters—except passwords— IP, and T1/E1.

•

writeUserlpWanSystem(242)—The monitor user can change all parameters—except passwords— IP, T1/
E1, System, and System Log links.

•

writeUserlpWanSystemUpload(498)—The monitor user can change all parameters—except passwords— 
IP, T1/E1, System, and System Log links. The monitor user can also load firmware updates into the DACS.

Содержание 3095









































































































































































































Отзывы:

Нет отзывов