manualshive.com logo in svg

Patton electronics 3095, Справочное руководство администратора, Страница: 137 / 200

Поделиться
Скачать
Patton electronics 3095 Скачать руководство пользователя страница 137

Out

135

mDSL DACS Administrators’ Reference Guide 

18 • SNMP

Get Responses (snmpOutGetResponses)

The total number of SNMP Get-Response PDUs that have been generated by the SNMP protocol entity.

Traps (snmpOutTraps)

The total number of SNMP Trap PDUs that have been generated by the SNMP protocol entity.

Authentication Failure Traps (snmpEnableAuthenTraps)

This value indicates whether the SNMP agent process is permitted to generate authentication-failure traps. 
The variable is global. This means that by being disabled, all authentication-failure traps are disabled.

Note

Note: It is strongly recommended that upon selecting either 

enabled(1)

 or 

disabled(2)

, it be saved in non-volatile memory by click-

ing on 

Record Current Configuration

 under 

Immediate Actions

 

on the Home page of the 3095 DACS. If the network management 
system is re-initialized (implying power cycling) while assuming the 
current configuration has been recorded, the current configuration 
will not be lost.

The two options for this variable are:

•

enabled(1)

•

disabled(2)

Содержание 3095









































































































































































































Отзывы:

Нет отзывов