manualshive.com logo in svg

Patton electronics 3095, Справочное руководство администратора, Страница: 107 / 200

Поделиться
Скачать
Patton electronics 3095 Скачать руководство пользователя страница 107

IP main window

105

mDSL DACS Administrators’ Reference Guide 

14 • IP

Note

The Discarded w/No Errors counter does not include any datagrams 
discarded while awaiting re-assembly.

Total Deliveries (ipInDelivers)

The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).

Out Requests (ipOutRequests)

The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests 
for transmission.

Note

The Out Requests counter does not include any datagrams counted 
in ipForwDatagrams.

Out Discards (ipOutDiscards)

The number of output IP datagrams for which no problem was encountered to prevent their transmission to 
their destination, but which were discarded (e.g., for lack of buffer space).

Note

The Out Discards counter would include datagrams counted in 
ipForwDatagrams if any such packets met this (discretionary) discard 
criterion.

Discarded for No Routes (ipOutNoRoutes)

The number of IP datagrams discarded because no route could be found to transmit them to their destination. 

Note

The Discarded for No Routes counter includes any packets counted 
in ipForwDatagrams which meet this “no-route” criterion. This 
includes any datagrams which a host cannot route because all of its 
default gateways are down.

Reassembly Timeout (ipReasmTimeout)

The maximum number of seconds which received fragments are held while they are awaiting reassembly at this 
entity.

# of Reassembled Fragments (ipReasmReqds)

The number of IP fragments received which needed to be reassembled at this entity.

# Successfully Reassembled (ipReasmOKs)

The number of IP datagrams successfully reassembled.

Reassembly Failures (ipReasmFails)

The number of failures detected by the IP reassembly algorithm (for whatever reason: timed out, errors, etc).

Note

The Reassembly Failures value is not necessarily a count of discarded 
IP fragments since some algorithms (notably the algorithm in 
RFC 815) can lose track of the number of fragments by combining 
them as they are received.

Содержание 3095









































































































































































































Отзывы:

Нет отзывов