manualshive.com logo in svg

Patton electronics 3095, Справочное руководство администратора, Страница: 131 / 200

Поделиться
Скачать
Patton electronics 3095 Скачать руководство пользователя страница 131

RIP Version 2 (Statistics)

129

mDSL DACS Administrators’ Reference Guide

 

17 • RIP Version 2

Status (rip2IfConfStatus)

Writing invalid has the effect of deleting this interface.

•

valid (1)

•

invalid (2)

RIP Version 2 (Statistics)

By clicking on 

Statistics

 in the 

RIP Version 2

 main window, you enter the 

RIP Version 2 Status

 window (see 

figure 41)It displays routing and update information for each subnet address.

Figure 41. RIP Version 2 details window

Subnet IP Address (rip2IfStatAddress)

The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where 
the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.

Bad Packets (rip2IfStatRcvBadPackets)

The number of RIP response packets received by the RIP process which were subsequently discarded for any 
reason (e.g. a version 0 packet, or an unknown command type).

Bad Routes (rip2IfStatRcvBadRoutes)

The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, 
or invalid metric).

Sent Updates (rip2IfStatSentUpdates)

The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full 
updates sent containing new information.

Status (rip2IfStatStatus)

Displays whether the Subnet IP Address is valid or invalid.

Содержание 3095









































































































































































































Отзывы:

Нет отзывов