manualshive.com logo in svg

Patton electronics 3095, Справочное руководство администратора, Страница: 124 / 200

Поделиться
Скачать
Patton electronics 3095 Скачать руководство пользователя страница 124

16 • UDP

mDSL DACS Administrators’ Reference Guide

122

Introduction

Introduction

User Datagram Protocol (UDP) is supported by the DACS. Detailed information regarding the SNMP man-
agement information base (MIB) variables can be found in 

RFC1213: Management Information Base for Net-

work Management of TCP/IP-based internets: MIB-II

.

To manage and collect statistics on UDP, click on 

UDP

 under the 

Configuration Menu

 to display the 

UDP

 win-

dow (see figure 38).

Figure 38. UDP window

Received (udpInDatagrams)

The total number of UDP datagrams delivered to UDP users.

Received With No Ports (udpNoPorts)

The total number of received UDP datagrams for which there was no application at the destination port.

Others Received with No Delivery (udpInErrors)

The number of received UDP datagrams that could not be delivered for reasons other than the lack of an 
application at the destination port.

Sent (udpOutDatagrams)

The total number of UDP datagrams sent from this entity.

Listener Table (udpTable)

The UDP Listener Table contains information about this entity’s UDP end-points on which a local application 
is currently accepting datagrams.

Local Address (udpLocalAddress)

The local IP address for this UDP listener. In the case of a UDP listener that is willing to accept datagrams for 
any IP interface associated with the node, the value 0.0.0.0 is used.

Содержание 3095









































































































































































































Отзывы:

Нет отзывов