PASI GEA RM1 1.0, Руководство пользователя

Страница: 19 / 71

GEA RM1 15
To begin with
6. To begin with
This chapter lists the steps that must be performed on the Gea RM1 system or on the Gea
RM1-PC program, in order to describe how to operate on the system and carry out some
common operations. For the description of the single steps, please refer to chapters 4 and
5, which respectively describe the operation of the Gea RM1 system and the Gea RM1-
PC program.
Terminology: Session, Table and File
In the manual and on the interfaces of the Gea RM1 system and the Gea RM1-PC program
the three terms are used to identify three different aspects of the same basic concept.
The basic concept that we want to identify is the software container that is used to store
data related to a sequence of homogeneous measurements, and must be managed in a
coherent way to allow a subsequent effective analysis. The informations kept in this
container are:
- distinguishing features of the measurement sequence (type of measurement,
algorithm used to calculate the measurement sequence);
- geographical references of the position in which the sequence of measures is
carried out;
- input parameters for the algorithm used for the calculation of the measurement
sequence;
- placing of the electrodes for each measurement;
- electrical quantities detected during the measurement;
- Moment in which the measure is carried out.
The informations of a measurement sequence is called in different ways to highlight the
different characteristics: Session, when it is used by the Gea RM1 system, Table when it
is used by the Gea RM1-PC program, File when you are in saving mode on PC .