PASI GEA RM1 1.0, Руководство пользователя

Страница: 57 / 71

GEA RM1 53
Description of the Gea RM1-PC program
When you press the Accept button the program will show the screen as in Figure 30
On the bottom right of the screen is shows the information on the first choice you made
to define the algorithm: this is an increase in the "b" parameter, the chosen value of 1.50
m and to be carried out 12 times. The total measurements for this table in the current
situation are 12 out of a maximum of 170 measures managed for a single session. If you
choose to end the construction of the algorithm at this point, by pressing the Ok key, the
table will be constructed as indicated starting from the initial value of "b" of 3.00 m (the
initial values used are those set on the screen at the time in which the Ok button was
pressed) and would consist of 12 measures in total.
The table would have configured, for the 12 measures provided by the algorithm, these
values (this is an explanatory table, the format of the real table stored on GPD file is
different):
Indice misura
Valore “a” Valore “b” Posizione “O”
1 2.00 3.00 0.00
2 2.00 4.50 0.00
3 2.00 6.00 0.00
… … … …
12 2.00 19.50 0.00
In the case of constructing a table having given only one choice (Choice 1) as input, it
will be performed by scanning all the required iterations, calculating the parameters for
each single measure using the algorithm associated with the choice. In pseudolinguaggio
di programmazione si potrebbe scrivere:
for any value of i between 1 and the number of interactions for Choice 1
calculates parameters of the measure by applying the index i to the algorithm of Choice
If the operator decides to insert a further cycle of variation of the parameters to the
algorithm, he could do so by selecting a new choice in the list (which is now called Choice
2). The possible choices in this case are reduced to two, the increase of the "a" parameter
and the displacement of the "O" point, since it is no longer possible to choose the
increment of the "b" parameter already used. Suppose that the "0" point displacement of
1.00 m is chosen at each iteration, and 6 iterations are performed. After pressing the
Accept button, the window will appear as in Figure 31.
On the bottom right of the page are the characteristics of the second choice, while the
total number of measures becomes 72 (ie 12 measures of the first choice multiplied 6
measures of the second choice).