PASI GEA RM1 1.0, Руководство пользователя

Страница: 21 / 71

GEA RM1 17
To begin with
The file should not be modified manually outside the Gea RM1-PC program, because any
inconsistent change/modification would render unusable the table contained in the
modified file. Any changes that will be necessary will therefore have to be carried out on
the table through the functions of the Gea RM1-PC program and not directly on the file
using a text editor.
The file name will coincide with the table name, and will be set by the operator when
creating, copying or downloading a table. If a copy of a GPD file is made outside the Gea
RM1-PC program, as a normal Windows file, this will be same as having copied a table
on the new file.
Execution of a single measurement
The execution of a single measurement can be made by operating only on the Gea RM1
system. The result of the single measurement can not be stored on the system, but the
measured values will be showed on video and must be copied by the operator.
- To perform a single measurement: run the "Single measurement" command on the
main menu of the Gea RM1 system, choose whether to perform a complete
measurement or a measure of only spontaneous potential and follow the
instructions in chapter 7 in Executing a single measurement .
Creation of a generic measurement session
The creation of a generic session of measurements can be carried out by operating only
on the Gea RM1 system. The session file is stored on the system and can be executed or
modified afterwards.
The geometrical positions of the electrodes for each individual measurement can be
entered on the system by the operator before executing the measurement, after having
made the measurement or not be entered and, if necessary, recorded externally to the
system.
- To create a generic session: run the "Session management" command on the Gea
RM1 system, followed by the "New session" command, choose "New complete
session" or "New session PS" (see chapter 7 in Session management ).
- Enter the name of the session you want to create (see chapters 7 in Entering a
string ).
- View the session you just created by going to the home page of the Gea RM1
system, and executing the "Measure sessions" command, select the name of the