PASI GEA RM1 1.0, Руководство пользователя

Страница: 27 / 71

GEA RM1 23
Description of the systems interface in standalone mode
key command is not performed). You can turn off the screen if you have sufficient light
or turn it on in case of poor visibility through the "Light" command on the main menu.
List of commands in the Main menu
The commands included in the menu of the main page allow to perform all the operations
offered by the system. These commands are listed below
-
> Sessions measure.
- > Resume last session.
- > Sessions management.
- > View Templates.
- > Templates management.
-
> Single measure.
-
> Measures configuration.
-
> System.
-
> System switch off.
-
- Light: switch off
In the following chapters the operations related to each menu item will be described.
Sessions and Templates
Before proceeding, it is necessary to describe the difference between sessions and
templates. Both the sessions and the templates are containers kept in the permanent
memory of the system, and are used to store the information related to sequences of
coherent and homogeneous measurements, thus informations about the type of
measurement (for example if it is a sequence in which the electrodes are managed
manually by the operator, or if he makes use of an electrode management automation
multiplexer, of the type of algorithm used for the calculation of electrode spreading, etc.)
and the electrode positioning information (as a consequence of the algorithm cited above,
or with a generic definition created by the operator).
The session can be performed by the system, ie the operator can control the execution of
each of the measures of which a manual session is composed, and store the result, or
perform the entire sequence of measurements in an automatic session.