PASI GEA RM1 1.0, Руководство пользователя

Страница: 22 / 71

18
new session created and press Enter (see chapters 7 in Measurement sessions
Entering a string).
- Display the individual measurements by running the "Measurements" command
and moving using the "Next measurement" and "Previous measurement" keys (see
chapter 7 in Display of the measurements of the session ).
- Choose a given measurement and select a line relating to a geometric distance
between electrodes to insert or modify the value (see chapter 7 in Execution,
editing and repetition of a measure in session ).
Running a measurement session on the system
The fulfillement of a measurement session can be achieved by operating only on the Gea
RM1 system. The result of the measurement session is stored on the system and can be
read later or downloaded to the PC for further viewing and analysis.
The geometrical positions of the electrodes for each individual measurement can be
entered on the system by the operator before carrying out the measurement, after having
made the measurement or outside the system after the measurement.
- View the session you just created by going to the home page of the Gea RM1
system, press the "Measure sessions" command, and select the name of the new
session you created then press the Enter key (see chapters 7 in Measurement
sessions ).
- Display the single measurements by running the "Measurements" command (see
chapter 7 in Display of the measurements of the session
- Select a given measure and press the "Execute / Modify" command followed by
the "Execute measurement" command to actually perform the measurement, or
select a line concerning a geometric distance between electrodes to be able to
insert or modify the contained value (see chapter 7 in Execution, editing and
repetition of a measure in session ).
- After having performed the measurement, display the measured electrical
parameters and accept or not the measurement (see chapter 7 in Execution,
editing and repetition of a measure in session ).
- Repeat the operations for selecting the measurement, variating the geometric
positions of the electrodes and carrying out the measurement until the desired
session is completed.