PASI GEA RM1 1.0, Руководство пользователя

Страница: 67 / 71

GEA RM1 63
Description of the Gea RM1-PC program
Default directory for saving and retrieving GPD files of measurement sessions. The
program will still allow to save or read GPD files from different directories.
By pressing the "Preference" button you can reach the page for the configuration of
further parameters related to the GUI of the Gea RM1-PC system, listed below.
- Linear measurement unit: the operator can choose whether to display the measurements
in meters or in yards. The saving of the measurements on GPD file is however done in
meters.
- Choice on the simplified table view. The operator can request that the Gea RM1-PC
program always displays the files in full mode or, when possible, display them in
simplified mode. The operator will however have the possibility to change the view mode
for each table using the "Full / simplified view" button in the Table management window.
- Date format: the operator can choose the date display format, choosing between the
three proposed formats: "yyyy-mm-dd", "dd / mm / yyyy" or "mm / dd / yyyy". Saving
dates on a GPD file is done in "yyyy-mm-dd" format.
- Electrode names: the names A, B, M and N or the names C1, C2, P1 and P2 can be
chosen. It only affects the display modes and not the format inside the GPD file, where
the electrodes are still stored as A, B, M and N
F
IGURE
48 -
PREFERENTIAL CONFIGURATION OF A SYSTEM