PASI GEA RM1 1.0, Руководство пользователя

Страница: 39 / 71

GEA RM1 35
Description of the systems interface in standalone mode
By carrying out the measurement, the progress dialog of the execution of the
measurement cycles shown in Figure 16 will be shown.
The information on the execution screen of a single measurement is shown below.
- Cycle: reports the cycle number within the measurement that is automatically performed
by the system at that time, so that the required accuracy calculated as maximum Sigma is
reached, or up to the maximum number of cycles set on the system. In Figure 16 the
system is performing the sixth cycle on a configured maximum of eleven cycles.
- Sigma: shows the Sigma value calculated on the completed measuring cycle and
reported as a percentage of the measured value. In Figure 16, the percentage value of
Sigma calculated for the first seven completed cycles is 27%. In the first two cycles of
execution of a measurement the Sigma value is not shown on the display.
- Graph below: expresses the two previous values graphically and intuitively: the
horizontal axis is divided into equal parts by a number equal to the maximum cycle value
set on the system for the measurement, the vertical axis shows the calculated Sigma value
for completed cycles. If the measurement is correctly executed without problems at each
cycle the sigma value will decrease and the graph will decrease to a curve with the black
part getting smaller at each repetition, otherwise the curve could have a more random
variation.
At the end of the measurement, which can occur when a Sigma value is lower than that
configured on the system, or when the configured maximum number of cycles is reached,
F
IGURE
28 -
IMAGE OF A MEASURE IN PROGRESS