DEMOQE128 User Manual
45
external hardware BDM tool is needed to debug and program the
DEMOQE128. A user only needs to connect the DEMOQE128 to their PC to
start developing code for it.
The DEMOQE128 package comes with a special edition of Freescale’s
CodeWarrior studio. In addition, P&E’s evaluation software for HCS08 and
ColdFire® V1 is available online at www.pemicro.com. A user may use either
CodeWarrior or P&E software tools to develop code for the DEMOQE128.
9.1
Using CodeWarrior With The DEMOQE128
The CodeWarrior studio supports Freescale’s HCS08 and ColdFire V1
devices. It offers C, C++, and assembly-level support, and provides
debugging capabilities based on P&E’s debug and programming
technologies.
A programming or debug session with the project-based CodeWarrior IDE
may be launched by double-clicking on the project name (the format is
projectname.mcp) from your file storage. Its tutorials, FAQs, and quick start
guides are easy to follow and will allow you use pre-built templates to begin
creating a new project in a short time. Codewarrior tutorials can be followed
based on the instructions of
Section 3.5 - LAB 4: Learn how to use
CodeWarrior
.
9.2
Using P&E Software With The DEMOQE128
P&E offers software tools for Freescale’s HCS08 and ColdFire V1 devices
that can be used to develop code for the DEMOQE128 board.
9.2.1
P&E Software Tools for HCS08 Microcontrollers
For Freescale’s HCS08 devices, P&E offers an integrated development
environment, which combines a command-line assembler, in-circuit
debugger, and flash memory programmer. The assembler includes features
such as a full string replacement macro, conditional assembly, include files,
and more. The debugger supports both assembly and C source-level
debugging. The programmer can program/reprogram both internal and
external flash devices in-circuit.
9.2.2
P&E’s Software Tools for ColdFire® V1 Microcontrollers
For Freescale’s ColdFire V1 devices P&E offers an integrated development
