DEMOQE128 User Manual
15
HCS08>Evaluation Board Exam-
ples>DEMOQE128>DEMOQE_Accelerometer_S08.
4.
Give the example a new project name (e.g., Lab3), set the desired
location, and click “Create Project.” This will open the Accelerometer
Application for the 8-bit microcontroller.
5.
Launch the AccelerometerDemo utility from within the
DEMOQE_Toolkit folder by double-clicking on the Accelerometer-
Demo.exe file.
6.
See the DEMOQE128 User Manual for more details on the Acceler-
ometer Demo utility.
7.
Set “Port” to “USB COM.”
8.
Set “Baud” rate to 115200.
9.
Turn the board power switch to OFF position.
10. Make sure the green 8-bit S08 daughter card is plugged in to the
board. The board jumpers should all be set to the default settings
shown in the Quick Start Guide.
11. Turn the board power switch to the ON position and make sure that
the debugger window is closed.
Run demo on 8-bit S08:
1.
Compile the Accelerometer Application and start the process of pro-
gramming it into the flash of the 8-bit QE128 microcontroller by click-
ing on the debugger launch button shown here :
2.
From Connection Manager menu, select “DEMOQE on the USB1”
port and click on “Connect (Reset).”
3.
From the Erase and Program Flash menu, click on “Yes” to allow the
debugger to mass erase the microcontroller’s on-chip flash memory
and program it with the new application.
4.
Click on the GO button in the debugger to run the application. The
GO button is shown here:
