18
DEMOQE128 User Manual
port and click on “Connect (Reset).”
3.
From the Loader Warning menu, click on “OK” to allow the debugger
to mass erase the microcontroller’s on-chip flash memory and pro-
gram it with the new application.
4.
Click on the GO button in the debugger to run the application.
5.
Bring the Accelerometer Demo utility to the front and click the “Open
Serial Port and Start Demo” button.
Figure 3-10: Accelerometer Demo running on 32-bit ColdFire V1 QE128 in data
averaging mode. Yellow arrow highlights the bus cycles required to average the
last 16 readings of the 3 axes. Value shown in orange circle is the number of bus
cycles in hex.
