DEMOQE128 User Manual
29
unsecure. This application works with the DEMOQE board as well as other
user hardware connected to the PC via the USB Multilink or Cyclone PRO
hardware interfaces.
Figure 6-3: DEMOQE Unsecure Application
In order to unsecure a device with this application, please specify the
hardware interface that you are using. If your P&E Multilink or Cyclone Pro is
successfully detected, the name of a corresponding device will appear in the
Port text box. Please select HCS08 or CFV1 from the Select Architecture drop
down menu and press the Perform Unsecure button. The application will
finish unsecuring and erasing the device shortly after.
This PC-based application is included on the DVD-ROM that accompanys the
DEMOQE, and may also be found at:
http://www.pemicro.com/fixedlinks/demoQEtoolkit.html.
6.4
DEMOQE Accelerometer Demo Application
This PC-based application will graph serial data output from the
microcontroller-based serial accelerometer application documented in
Section 7.2 - Serial Accelerometer Application
. The graphed data includes
the magnitude of the X, Y, and Z accelerometer signals, as well as the current
processor loading. For this application to work properly, the
microcontroller-
based
serial accelerometer application must be programmed into the
microcontroller which is plugged into the DEMOQE board.
