20
DEMOQE128 User Manual
dialog. If the startup dialog is not shown, it may be opened from the
CodeWarrior menu by clicking “File” and then “Startup Dialog… ”.
3.
From the Freescale CodeWarrior Tutorials menu select the tutorial
you would like to view.
4.
Select “Click here to start tutorial” and follow on-screen instructions.
4
SYSTEM SETUP
4.1
Overview
P&E’s Embedded Multilink driver is required to operate the DEMOQE128
using a PC. The Embedded Multilink driver should be installed with the
CodeWarrior Development Studio software or from the DEMOQE Resources
in the DVD-ROM before the PC is connected to the DEMOQE128.
4.2
Operating System Requirements
The following are the resources required to run the CodeWarrior
Development Studio and the DEMOQE128:
•
A PC-compatible system running Windows 2000, Windows XP, or
Windows Vista
•
128MB of available system RAM, and 1GB of available hard disk
space
•
A DVD-ROM drive for software installation
•
A USB port
4.3
Software Setup
4.3.1
Installing CodeWarrior Development Studio
To install the CodeWarrior Development Studio, Follow the instructions in the
Section 3.1 - Quick Start Guide
.
4.3.2
Installing P&E Resources
Use the DEMOQE Resources in the DVD-ROM to access and install P&E
