Panasonic S-LINK V, Руководство пользователя

Страница: 74 / 182

74
Chapter 4
Specifications
● Address setting switches
1 2 4 8
16 32 64
128 256
ON
Not Used
<Input unit>
1 2 4 8
16 32 64
128 256
ON
HOLD
<Output unit>
The output unit has the ‘HOLD’ switch that can set the output holding function.
When you set the address, also set the output holding function.
For a detailed description of the output holding function, refer to page 32, and correctly set the
function.
CAUTION
Be sure to set the address of each I/O unit.
Address is the numerical value set by the address setting switches. For the I/O module, the sum total of the ad-
dress numbers [sum total of the ADD. (COM.)] (pin No.28) value and the shorted ADD. (256) to ADD. (1) (pin
No.19 to 27) values will be the first address of the module. For a detailed description of the pin arrangement,
refer to pages 136 and 138.
The address setting range is 0 to 511.
Set the address in the address setting range specified by the PLC I/O connector number. NOTE
<Example of address setting>
● To set the address to ‘3’:
1 + 2 = 3
1 2 4 8
16 32 64
128 256
ON
Not Used
For the address setting list (ON / OFF statuses of address setting switches), refer to “ our
website: https://panasonic.net/id/pidsx/global .”
NOTE
When the system is set, the controller will recognize the addresses shown in the following table:
Type Model Address recognized by controller
PLC input connector SL-VS □
Value set by connector number setting switches
PLC output connector
SL-VP
□
Input unit
SL-VCH10/20
SL-VTB □
SL-VT □ J
SL-VT □ E
SL-VT16C1
SL-VTAD1
SL-VM □ (Note)
Address set by address setting switches (first address)
Output unit
SL-VCH11/22
SL-VTBP
□
SL-VTP □ J
SL-VTP
□
E
SL-VTP16C1 ( -S )
SL-VTDA1
SL-VTPR □
SL-VMP
□ (Note)
I/O mixed unit
SL-VCH21
Address set by input-side address setting switches (first input address)
The output address will not be recognized.
Note: Address setting switches are not incorporated in the SL-VM□ and SL-VMP□ .