Panasonic S-LINK V, Руководство пользователя

Страница: 138 / 182

138
Chapter 4
Specifications
● Output circuit diagram and pin layout drawing
100mA
max.
Z
D
Tr
+24V
Output device side
COM. (-)
OUT0
OUT15
GND
SEND
ADD. (256) ADD. (1) ADD. (COM.)
0V
D
G
HOLD
Load
24V DC
±10%
+
-
S-LINK V
system side
Pin No.
Main circuit
Symbols… Z
D
: Surge absorption zener diode
T
r
: NPN output transistor
Pin No. Description Pin No. Description
1 COM. (-) Output common – – –
2 OUT 0
Output
(Note 1)
19 ADD. (256)
Address setting
input (Note 2)
3 OUT 1 20 ADD. (128)
4 OUT 2 21 ADD. (64)
5 OUT 3 22 ADD. (32)
6 OUT 4 23 ADD. (16)
7 OUT 5 24 ADD. (8)
8 OUT 6 25 ADD. (4)
9 OUT 7 26 ADD. (2)
10 OUT 8 27 ADD. (1)
11 OUT 9 28 ADD. (COM.)
12 OUT 10 29 HOLD Hold setting input (Note 3)
13 OUT 11 30 GND Grounding
14 OUT 12 31 SEND
Transmission
indicator output
15 OUT 13 32 G
Transmission
signal input
16 OUT 14 33 D
17 OUT 15 34 0V
Power input
18 N.C. Non-connection 35 +24V
Pin No.1
(Bottom view)
35 19
18
Notes: 1) Pin No.10 to 17 of the SL-VMP8 will be the N.C. pins (non-connected pins).
2) Pin No.28 [ADD. (COM.)] is shorted to pin No.19 to 27 [ADD. (256) to ADD. (1)], and sum total of their address numbers will be the
first address.
3) Open the line between pin No.29 (HOLD) and pin No.28 [ADD. (COM.)] to set the ‘HOLD OFF’ mode.
Short this line to set the ‘HOLD ON’ mode.
4) Pin No.34 (0V), pin No.32 (G), pin No.30 (GND), and pin No.28 [ADD. (COM.)] are electrically insulated inside the unit. Do not short
these pins.
● Dimensions (Unit: mm)
51 13
0.6
3.4
2.54
(7)
32
5
0.6
2.54
17 × 2.54 = 43.18