133
Chapter 4
Specifications
●
Specifications
Type
4-channel
8-channel
Model No.
SL-VTPR4
SL-VTPR8
Supply voltage
24V DC±10% (Supplied from
S-LINK V
controller or separate power supply)
Current consumption
90mA or less (When all points are ON)
150mA or less (When all points are ON)
Address setting
Using switches, in the range of 0 to 511
Output
Relay contact 1a (Note 1)
• Switching capacity: 50V, 3A AC (resister load)
However, if compatibility with the CE is not necessary, use of 250V, 3A AC is possible.
30V, 3A DC (resister load)
• Electrical service life: 100,000 times of operation or more (rated load, switching frequency of 20 times/min)
• Mechanical service life: 20,000,000 times of operation or more (switching frequency of 180 times/min)
Output operation
The output relay is turned ON if the output signal from the signal transmission line is turned ON.
Number of output points
4 points
8 points
Indicators
Power
Green LED (lights up when the power is supplied)
Transmission
Green LED (blinks when the synchronization signal is sent from the
S-LINK V
controller)
Operation
Orange LED (lights up when each channel relay is turned ON)
Output holding function
Incorporated
Environmental resistance
Ambient temperature (Note 2)
-10 to +55°C (No dew condensation or icing allowed), Storage: -20 to +70°C
Ambient humidity
35 to 85% RH, Storage: 35 to 85% RH
Noise immunity
Power line: 500Vp, 10ms cycle, 1µs pulse width
Common: 1,000Vp, 10ms cycle, 1µs pulse width (with noise simulator)
Voltage withstandability
1,000V AC for one min. between all terminals connected together and enclosure
Insulation resistance
20MΩ, or more, with 500V DC megger between all terminals connected together and enclosure
Vibration resistance
10 to 150Hz frequency, 0.75mm amplitude or maximum acceleration 49m/s² in X, Y and Z directions for two hours each
Shock resistance
490m/s
2
acceleration (approx. 50G) in X, Y and Z directions for two hours each
Mounting
Mounted on DIN rail or by tightening screws
Tightening torque
Mounting screw: 0.8N·m or less
Material
Enclosure: PC-ABS resin, Cover: Polycarbonate, DIN rail stopper: POM, Relay remover key: POM
Cable
0.5mm
2
4-core flat cable, 0.6m long
Weight
Approx. 100g
Approx. 160g
Accessories
Cover: 1 pc., Switch cap: 1 pc., Relay remover key: 1 pc.
Notes: 1) This product is incorporated with the PA-N relay manufactured by Panasonic Corporation. However, when you replace the relay, you
can also use the PhotoMOS relay manufactured by Panasonic Corporation.
For a detailed description, refer to the Instruction Manual enclosed with the
SL-VTPR
□.
2) If this product is stored in the control panel together with the other units, the temperature may rise above the specified operation tem
-
perature due to the heat generated by the other units.
In this case, install a cooling fan, etc. so that the ambient temperature can be in the specified range.
*Ambient temperature and number of photoMOS relay ON points - Load current characteristics
The upper limit value of the load current depends on the ambient temperature and the number of photoMOS relay ON points.
SL-VTPR8
+AQZ202D
4.00
3.00
2.00
1.00
0
-
20
0
20
40
60
No. of outut-ON relay pts.: 1 or 2
No. of outut-ON relay pts.: 3 or 4
No. of outut-ON relay pts.: 5 or 6
No. of outut-ON relay pts.: 7 or 8
SL-VTPR8
+AQZ205D
2.00
1.50
1.00
0.50
0
-
20
0
20
40
60
No. of outut-ON relay pts.: 1 or 2
No. of outut-ON relay pts.: 3 or 4
No. of outut-ON relay pts.: 5 or 6
No. of outut-ON relay pts.: 7 or 8
SL-VTPR8
+AQZ204D
0.40
0.30
0.20
0.10
0
-
20
0
20
40
60
No. of outut-ON relay pts.: 1 or 2
No. of outut-ON relay pts.: 3 or 4
No. of outut-ON relay pts.: 5 or 6
No. of outut-ON relay pts.: 7 or 8
SL-VTPR8
+AQZ207D
0.80
0.60
0.40
0.20
0
-
20
0
20
40
60
No. of outut-ON relay pts.: 1 or 2
No. of outut-ON relay pts.: 3 or 4
No. of outut-ON relay pts.: 5 or 6
No. of outut-ON relay pts.: 7 or 8
Load current (A)
Load current (A)
Load current (A)
Load current (A)
Ambient temperature (°C)
Ambient temperature (°C)
Ambient temperature (°C)
Ambient temperature (°C)
Содержание S-LINK V
