Panasonic PT-REQ12 Series, Руководство по эксплуатации

Страница: 165 / 306

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 165
Note
f
The [BACKUP INPUT SETTING] setting item is common with the following menu item.
g
The [DISPLAY OPTION] menu → [BACKUP INPUT SETTING]
f
The backup function is enabled when [BACKUP INPUT MODE] is set to anything other than [OFF] and same signal is input to the primary
input and the secondary input.
f
To switch to the backup input signal using the backup function, make sure that the following three conditions are satisfied to be ready to use
the function.
g
Set [BACKUP INPUT MODE] to anything other than [OFF].
g
Input the same signal to the primary and secondary inputs.
g
Display the image of the primary input or secondary input.
f
If the input is switched to other than the primary or secondary input while the backup function is ready for use, the state of readiness to
use the backup function is canceled. To switch to the backup input signal using the backup function again, switch to the primary input or
secondary input.
f
When [BACKUP INPUT MODE] is set to anything other than [OFF], the combination of that input is displayed in [PRIMARY INPUT] and
[SECONDARY INPUT] of the
[BACKUP INPUT SETTING]
screen.
f
[BACKUP INPUT STATUS] is displayed in the input guide (
x
page 138) and the
[STATUS]
screen (
x
pages 86, 175 ) when [BACKUP
INPUT MODE] is set to anything other than [OFF].
When the signal can be switched to the backup input signal using the backup function, [ACTIVE] is displayed in [BACKUP INPUT STATUS].
When it is not possible, [INACTIVE] is displayed instead.
The secondary input will be the backup input when [BACKUP INPUT STATUS] is displaying [ACTIVE] while the image from the primary
input is displayed.
The primary input will be the backup input when [BACKUP INPUT STATUS] is displaying [ACTIVE] while the image from the secondary
input is displayed.
f
When [BACKUP INPUT MODE] is set to anything other than [OFF], the input is switched seamlessly if the input is switched between the
primary input and the secondary input while it is possible to switch to the backup input signal.
f
When [AUTOMATIC SWITCHING] is set to [ENABLE], and [BACKUP INPUT STATUS] shows [ACTIVE], the signal is switched to the
backup input if a disruption occurs in the input signal.
f
When [AUTOMATIC SWITCHING] is set to [ENABLE], the indication in [BACKUP INPUT STATUS] will change to [INACTIVE] if the input
signal is disrupted and automatically switched to the backup input. In this case, it is not possible to switch to the backup input signal until the
original input signal is restored. If the input has switched to the backup input automatically, it is possible to switch to the backup input signal
when the original signal has has been restored. In this case, the current input is maintained.
f
The primary input setting values are applied to image adjustment values such as the [PICTURE] menu → [PICTURE MODE], [GAMMA],
and [COLOR TEMPERATURE].
[SECONDARY INPUT]
Set the secondary input switching function that will automatically switch to the specified input when the input
signal of projecting image is discontinued.
1) Press
as
to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f
The [NO SIGNAL SETTING] screen is displayed.
3) Press
as
to select [SECONDARY INPUT].
4) Press the <ENTER> button.
f
The [SECONDARY INPUT] screen is displayed.
5) Press
as
to select the input to be specified as the switching destination, and press the <ENTER>
button.
[OFF] Disables the secondary input switching function.
[HDMI1] Sets the secondary input to HDMI1.
[HDMI2] Sets the secondary input to HDMI2.
[DisplayPort] Sets the secondary input to DisplayPort.
[SDI [SLOT]]
*1
Sets the secondary input to SDI.
[DIGITAL LINK [SLOT]]
*2
Sets the secondary input to DIGITAL LINK
*3
.
[PressIT [SLOT]]
*4
Sets the secondary input to PressIT.
[SLOT]
*5
Sets the secondary input to SLOT.
*1 This item can be selected when the optional 12G-SDI Terminal Board (Model No.: TY-SB01QS) is installed in <SLOT>.
*2 This item can be selected when the optional DIGITAL LINK Terminal Board (Model No.: TY-SB01DL) is installed in <SLOT>.
*3
Individual input on the twisted‑pair‑cable transmitter or the DIGITAL LINK output supported device cannot be specified.
*4 This item can be selected when the optional Wireless Presentation System Receiver Board (Model No.: TY-SB01WP) is installed in <SLOT>.
*5 This item can be selected when the Function Board by other manufacturers is installed in <SLOT>.
Note
f
When the [PROJECTOR SETUP] menu → [NO SIGNAL SETTING] → [BACKUP INPUT SETTING] → [BACKUP INPUT MODE] is set to
anything other than [OFF], the secondary input switching function will not operate even when [SECONDARY INPUT] is set to anything other
than [OFF]. The backup input switching function is prioritized.