Panasonic PT-REQ12 Series, Руководство по эксплуатации

Страница: 135 / 306

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 135
Note
f
The optimal setting varies depending on the installed Function Board and the output setting of the connected external device. Refer to the
Operating Instructions of the Function Board and the external devices.
Setting [EQUALIZER] in [SLOT IN] (SLOT input)
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The [SLOT IN] screen is displayed.
3) Press
as
to select [EQUALIZER].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
f
Adjust while viewing the image.
[0] - [7]
Change the setting when the projected image does not stabilize. The higher the value, correction by
the equalizer becomes stronger.
(Factory default setting: [0])
Setting [AUTO GAMMA SELECT] in [SLOT IN] (SLOT input)
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The [SLOT IN] screen is displayed.
3) Press
as
to select [AUTO GAMMA SELECT].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ENABLE]
Select this item when the gamma mode is to be automatically set to the one compatible with
HDR (High Dynamic Range) based on the InfoFrame information added to the image signal. In
such case, the [PICTURE] menu
→
[GAMMA] is set to [HDR ST2084-500], [HDR ST2084-1000], or
[HDR HLG].
[DISABLE]
Select this item when the gamma mode is not to be automatically set and to specify the gamma mode
with the [PICTURE] menu → [GAMMA].
Note
f
Even if [AUTO GAMMA SELECT] is set to [ENABLE], when the information required for the HDR (High Dynamic Range) support is not
included in the InfoFrame information added to the displayed image signal, the gamma mode is not automatically set and follows the setting
in the [PICTURE] menu
→
[GAMMA].
Setting [AUTO COLOR SPACE SELECT] in [SLOT IN] (SLOT input)
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The [SLOT IN] screen is displayed.
3) Press
as
to select [AUTO COLOR SPACE SELECT].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ENABLE]
Select this item when the color space is to be automatically set to the one compatible with HDR (High
Dynamic Range) based on the InfoFrame information added to the image signal. In such case, the
[PICTURE] menu → [COLOR SPACE] is set to [ITU-2020 emu.].
[DISABLE]
Select this item when the color space is not to be automatically set and to specify the color space with
the [PICTURE] menu
→
[COLOR SPACE].