Panasonic LP-RF Series, Руководство по установке и обслуживанию

Страница: 118 / 218

118
4-6-11 Select file
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
T1
T2
T4
T6
*2
*1
T5
T4
T3 T3
T2
T1
SELECT 0 - 2 IN
(No.19-21)
D0 - D15 IN (No.3-18)
PROCESSING OUT (Y10)
SET OK OUT (No.28)
SET IN (No.2)
TRIGGER IN (X5)
READY OUT (Y5)
File
number A
File number A
ready
File number B
ready
File
number A
File
number B
Item Time Remarks
T1 0.5ms or more After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN and D0 IN to
D15 IN, turn on SET IN (No.2).
T2 0ms or more Keep the input until SET OK OUT (No.28) turns on.
T3 2 to 510ms One-shot output. Set the output time on the system settings screen. There is a small
margin of error for the setting value.
T4 ― • In the laser pumping completed and shutter opened state: Time for marking data
creation. It varies depending on the quantity of the setting data.
• When the laser pumping is not completed and shutter is closed: Total time for shutter
opening and marking data creation, or time for laser pumping, whichever is longer.
T5 2ms or more Keep the ON status for 2ms or more.
T6 0ms or more To input the next file number right after TRIGGER IN (X5), input SET IN (No.2) after
PROCESSING OUT (Y10) turns ON.
*1 : Turn off SELECT 0 IN to SELECT 2 IN when you specify a file number.
*2 : You can input the next file number during the trigger processing. If the trigger processing was being executed when
you turned on SET IN (No.2), the file number changes after the trigger processing completes.
ME-LPRF-SM-11