Panasonic LP-RF Series, Руководство по установке и обслуживанию

Страница: 41 / 218

41
2-3-4 Marking position check
„
Guide laser
The marking position can be checked visually by using the guide function with the red laser beam.
ワㄐㄕㄊ㄄ㄆ
• Use the guide display function only as the guideline. For the appropriate marking quality, fine adjust the work distance
and setting position of the target object by checking the actual marking results.
• When the fiber unit is removed and re-installed, the lasing position might be misaligned relative to the guide laser
radiation position. To align the lasing position, calibrate the marking field with following the procedures described in the
“Laser Marker NAVI smart Operation Manual”.
With the guide laser the following data can be indicated.
Display mode Description
Marking field Displays the marking field frame and center lines with the guide laser.
Marking image Displays the setting data in the file.
The object data with marking off setting is not displayed.
Masked objects Displays only the data set to Marking off and enabled guide indication.
Work distance The guide laser shows the rough indication of the work distance (distance from the head base to
the marking surface). The red point emitted in oblique and the red cross emitted perpendicularly
from the head are displayed. The distance where the laser point is closest to the center of the
cross represents the guide of the work distance.
Marking field indication
Marking image indication Work distance indication
ABCD
Where the red point is closest to
the center of the cross is the rough
indication of the work distance.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• For details of the guide display function, please refer to the “Laser Marker NAVI smart Operation Manual”.
ME-LPRF-SM-11