Panasonic LP-RF Series, Руководство по установке и обслуживанию

Страница: 125 / 218

125
4-6-19 Interlock input
If INTERLOCK (X16 - X17 and X18 - X19) is opened, the laser pumping is turned off and the shutter is closed, regardless of
whether or not the laser is radiating. Refer to “Laser marker operation when functions for safety measures are input” (P.90).
T3
T1
T1 T1
T1
T1 T1
T2 T2 T2 T2 T2 T2
T3 T3
T5 T5 T5
T7
T4 T4 T4
T6
ON (Close)
OFF (Open)
ON (Normal)
OFF (Error)
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
CLOSE
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
OPEN
ON
OFF
TRIGGER IN (X5)
INTERLOCK 1 (X16-X17)
INTERLOCK 2 (X18-X19)
INTERLOCK 1 MONITOR
(Y16-Y17)
ALARM RESET IN (X15)
SHUTTER CLOSE 1 OUT (Y8)
SHUTTER CLOSE 2 OUT (Y9)
READY OUT (Y5)
PROCESSING OUT (Y10)
PROCESSING FAIL OUT (Y12)
ALARM OUT (Y15)
INTERLOCK 2 MONITOR
(Y18-Y19)
SHUTTER ENABLE IN (X9)
SHUTTER IN (X8)
LASER SUPPLY IN (X6)
LASER STANDBY OUT (Y6)
Marking
interruption
Item Time Remarks
T1 Approx. 50ms INTERLOCK MONITOR is switched open and closed with a delay of approx. 50ms with
reference to each INTERLOCK input.
T2 Max. 1 sec. There is a delay time of around 200ms to max. 1 second from turning ON/OFF of
SHUTTER IN (X8) to turning ON/OFF of SHUTTER CLOSE 1 OUT (Y8) and SHUTTER
CLOSE 2 OUT (Y9). SHUTTER CLOSE 1 OUT and SHUTTER CLOSE 2 OUT will be
output by the same operation, but their output timing has a margin of error.
T3 100ms or more Keep the ON status for 100ms or more.
T4 Approx. 7 sec. Time for completion of laser pumping.
T5 ― Total time for shutter opening and marking data creation, or time for laser pumping,
whichever is longer.
T6 2ms or more Keep the ON status for 2ms or more.
T7 2 to 510ms This is One-shot output. Set the output time on the environment setting screen. There is
a small margin of error for the setting value.
ME-LPRF-SM-11