Panasonic LP-M Series, Руководство по эксплуатации, Страница: 58 / 308

58
1-4-2 Mark on Uneven Figure
„
Sample
ABCD
Difference in Level
(Height of Unevenness): 16 mm
Length: 8 mm
Length: 14 mm
Width: 40 mm
Setting of figure
[First Layer] [Second Layer]
• Layer No. : 0 • Layer No. : 1
• Work Type : Plane • Work Type : Plane
• Length : 14 mm • Length : 8 mm
• Width : 40 mm • Width : 40 mm
• Center X : 24 mm • Center X : 24 mm
• Center Y : 24 mm • Center Y : 35 mm
• Center Z : 0 mm • Center Z : 16 mm
Logo condition (First Layer) Character Condition (Second Layer)
• Marking character : ABCD
• X Position : 0 mm • Starting Coordinate X : -8 mm
• Y Position : 0 mm • Starting Coordinate Y : -2 mm
Marking Image
• X Scale : 0.75 • Character Height : 4 mm
• Y Scale : 0.75 • Character Width : 3 mm
• Character Interval : 4 mm
X
Y
X
Y Y
XXXX XX
24mm
24mm
Original Point of Local Coordinate
(Center of 3D Figure)
Original Point of
World Coordinate
ABCD
Z’
X’
Y’
X’
Y’
35mm
16mm
24mm
Original Point of Local Coordinate
(Center of 3D Figure)
Original Point of
World Coordinate
Marking Figure Marking Figure
X
Y
Original Point of Local
Coordinate
ABCD
X
Y
-2mm
-8mm
X Position, Y Position
(Character Condition)
Original Point of
Local Coordinate
Marking Logo File Marking Character
„
Setting Flow
Set the character type, logo type, character position, and logo position to be marked on the uneven figure.
Set the size, angle, and center position of the uneven figure.
2. Set the marking Conditions.
1. Set the uneven figure.
ME-LPMSZ-OP-7