manualshive.com logo in svg

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 194 / 308

Поделиться
Скачать
Panasonic LP-M Series Скачать руководство пользователя страница 194

194

2-12-2  Marking to Flying Object

* 

This function is not implemented in the LP-SxxxW type

The trigger conditions at marking to flying object are set.

 

„

Moving Direction

The moving direction of line at marking to flying object is set.

Reference

•  The moving direction is common in the all files.

LEFT

BACK

RIGHT

FRONT

Notice

• 

In the case of using the function of marking bold character, there might be the possibility that the marking quality is 
affected. Therefore, operate the laser marker after performing the marking test using the function of marking bold 
character.

•  Since the marking to the flying object is affected by vibration or line speed easily, marking and reading 2D code or bar 

code to the flying object might become unstable. Therefore, when marking 2D code or bar code to the flying object, 
check the marking and reading state of the marked code on the flying object sufficiently.

• 

Overwriting marking, Step & Repeat marking, point radiation, or Reset at date update functions cannot be used with the 

marking to flying object.

•  Equidistant marking on the flying object cannot be used in combination with rank marking, external offset, and serial 

data marking function.

• 

In case of LP-M / LP-Z series, the function of Concatenated Marking to Flying Object can not be used in combination 
with 3D setting.

• 

In case of LP-M / LP-Z series, to use the function of Marking to Flying Object in combination with 3D setting, use the 

encoder. The marking to flying object without encoder is not available.

•  If the rank, external offset, or serial data marking functions are used with the marking to the flying object (excluding the 

equidistant marking), make sure that the marking interval time is enough to the required period to input the marking data 

and to confirm the marking ready output.

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Отзывы:

Нет отзывов