Panasonic LP-M Series Скачать руководство пользователя страница 190

Страница: 190 / 308

190

Setting of the marking energy upper/lower limits

To confirm the stability of the marking energy, set the upper and lower limits.

If the measurement results is out of this limit, warning message appears.

Reference

• Confirm the marking energy with the actual test marking.

Based on this measurement, first set rather lower laser power to radiate the laser, change the setting value gradually

while check the marking quality to set the upper/lower limits.

Enable the upper/lower limit setting.

Input the tolerance [%] of the marking energy and press
[AUTO CALC.]. (auto setting)

Or input any value for upper and lower limits. (manual
setting)

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Результаты поиска

Содержание LP-M Series

Отзывы:

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 190 / 308

Результаты поиска

Содержание LP-M Series

Отзывы: