manualshive.com logo in svg

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 168 / 308

Поделиться
Скачать
Panasonic LP-M Series Скачать руководство пользователя страница 168

168

Reference

• 

This product supports Format 06 of ISO15434 for DataMatrix 
macro 06.

• 

For GS1 Data Matrix, the control code “FNC1” is automatically 
inputted at the head of the code data. When inputting AI 
“01” followed by 13-digit numerical character, the check digit 
(modulus10/weight 3-1) is inputted automatically at the next digit.

• 

For Data Matrix, group separator (GS) of variable length AI data is 
not inputted automatically.  
Press the Symbol button on the Data Input screen and then press 
“GS”.

• 

When the code data is set in the several strings, they are 
connected together without linefeed to create the code data. This 
linefeed can be applied only to the human readable text of the GS1 
Data Matrix.

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Отзывы:

Нет отзывов