manualshive.com logo in svg

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 229 / 308

Поделиться
Скачать
Panasonic LP-M Series Скачать руководство пользователя страница 229

229

2-16-2  System Setting (Environment 2)

Reference

• 

Setting of Environment 2 is saved without overwriting.

1

2

3

4

5
6

7

8

 

„

Date and Time

The setting of internal clock provided to the laser marker. The dominical year, month, date, era year, hour, minute and 
second can be set. The internal clock is used to mark the current date and expiry date set as the function character.

Notice

• 

The following items, Date, Lot, and Expire Date are marked based on the internal clock integrated in the laser marker.  
The internal clock might be deviated caused by the error of the internal parts or degree of the battery drain. Therefore, 
be sure to check the time of the internal clock before the operation.

 

„

Console

The console connected to the laser marker is specified.

Item

Description

1 

Type

:

Specifies the type of console connected to the laser marker.

LP-ADP20 

g

 LP-ADP40 

g

 15” Monitor 

g

 17” Monitor 

The setting varies by pressing the setting field.

2 

Backlight Timeout

: Sets the period till the automatic back light OFF.

The light is always turned on when “0” is specified here.
The setting is possible for the specified console. (“LP-ADP20” or “LP-ADP40”)

Setting Range 

0 to 60 min.

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Отзывы:

Нет отзывов