Panasonic LP-M Series Скачать руководство пользователя страница 51

Страница: 51 / 308

1-3-8 Mark to Flying Object

Reference

•

No marking functions for mobile devices are implemented to LP-SxxxW type.

Sample

1826

Sensor

The following shows the procedure for marking to flying object.

The detail is described in “2. Set the status of the laser marker into ready for receiving trigger.” (P.54).

The detail is described in “1. Set the conditions of the on-the-fly marking.” (P.52).

Refer to “1-2-3 Set the marking data” (P.17).

3. Set the status of the laser marker into ready for receiving trigger.

Set the conditions of the on-the-fly marking.

1. Input character and set the marking conditions.

Reference

•

For details on marking on moving object, refer to “2-12-2 Marking to Flying Object” (P.194).

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Результаты поиска

Содержание LP-M Series

Отзывы:

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 51 / 308

Результаты поиска

Содержание LP-M Series

Отзывы: