manualshive.com logo in svg

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 218 / 308

Поделиться
Скачать
Panasonic LP-M Series Скачать руководство пользователя страница 218

218

Installed Font

The attached “Laser Marker Utility (CD-ROM)” contains the following font files.

(For Font: [CD-ROM]\Font)

Save the files into a USB media when registering it to the laser marker.

Character font

Alphanumeric and signal font of original for laser marker. (Original Font)
(Refer to the Character Code Table of Serial Communication Guide for the character kind and character code.)

Original 1 (ORG1.FON) 

: font suitable for multipurpose letter marking.

Original 2 (ORG2.FON) 

: font suitable for lower-case letter marking.

Original 3 (ORG3.FON) 

: font suitable for nameplate marking etc.

Original 4 (ORG4.FON) 

: font for high-speed marking.

Original 5 (ORG5.FON) 

: font suitable for micro lower-case letter.

OCR1 (OCR1.FON)   

: font suitable for confirming the processed image.

Original1 (small) (ORG1S.FON)  : 80% reduced-size font of Original1.
Original2 (small) (ORG2S.FON)  : 80% reduced-size font of Original2.
Original3 (small) (ORG3S.FON)  : 80% reduced-size font of Original3.

Reference

• 

Original 4 font contains some characters that can not be bold.

• 

By using reduced size font, arrange a proper balance of character line when Kanji and alphanumeric characters are 
used in the same character line.

JIS font

Font file of Hiragana, Katakana, Grecian, Russian, and Kanji.

(Refer to the Character Code Table of Serial Communication Guide for the character kind and character code.)

JIS First Level (JIS1.FON)
JIS Second Level (JIS2.FON)

User Registration Character Font

The font file in which the user registers the font newly created with the font maker (refer to Font Maker Operation Manual.)

* 

The following character fonts are previously registered at 8121 (HEX) to 8129 (HEX) in the character font by user 
registration installed in the CD-ROM.

Shift JIS

JIS

0

1

2

3

4

5

6

7

8

9

A

B

C

D

E

F

User

Registration

Character

F13F

8120

F14F

8130

F15F

8140

F16F

8150

User Registration (USER.FON)

2D Code Pattern Font

Pattern font for 2D code allocated to codes 2230 (HEX) to 2239 (HEX) and 8121 (HEX) to 8152 (HEX).

* 

The pattern font for 2D code installed into CD-ROM is already registered the pattern font for 2D code allocated to codes 
2230 (HEX) to 2239 (HEX) and 8121 (HEX) to 8152 (HEX).

(Refer to “2D Code Pattern Font” (P.171) for the kind and code of character.)

2D Code Pattern (2DCODE.FON)

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Отзывы:

Нет отзывов