manualshive.com logo in svg

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 284 / 308

Поделиться
Скачать
Panasonic LP-M Series Скачать руководство пользователя страница 284

284

 

 

„

GS1 DataBar Limited

4. Bar Code Height

1. Le

ft G

ua

rd P

at

te

rn

1. R

ig

ht G

ua

rd P

at

te

rn

2.

 D

at

a 

C

ha

ra

ct

er

3. C

he

ck C

ha

ra

ct

er

2.

 D

at

a 

C

ha

ra

ct

er

(18,7) (26,7)

(26,7)

Name

Description

1 

Left/Right Guard 
Pattern

Provides the bar code area. It consists of bars and spaces of one module (minimum unit 
consisting of bars and spaces).

2 

Data Character

Has the (n, k) structure. “n” indicates the number of modules and “k” indicates that of 
bars and spaces that make up the character. This data character is composed with 7 
bars and spaces consisting with 26 modules. The element is arranged from left to right 

as shown in the figure above.

3 

Check Character

This check character is composed with 7 bars and spaces consisting with 18 modules, 
and it is set between 2 data characters. It is used to check if the read data is correct 
or not by putting the value calculated with the certain formula on just before the stop 
character for re-calculation.

4 

Bar Code Height

The minimum value of bar code height is 10 times as high as the module width.

Content of code data

• 

GS1 DataBar Limited indicates the numerical (0 to 9).

•  The data consists of application identifier “01” and 13-figure numerical characters.
•  The application identifier indicates the content of data and automatically added.
• 

The data that can be bar-coded is “0000000000000” to “1999999999999”. The data “2000000000000” or more cannot 
be bar-coded.

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Отзывы:

Нет отзывов