manualshive.com logo in svg

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 222 / 308

Поделиться
Скачать
Panasonic LP-M Series Скачать руководство пользователя страница 222

222

2-15-6  Backup

In the menu of “OTHER”, the marking data stored in the laser marker can be saved as a backup file or a text file.

 

„

Backup

Executes the exporting the backup data of the laser marker to USB media.
The backup consists of the following data.

•  Setting files, Common files (The current value of the counter function is not included in backup data.)
•  Logo files
•  Font files
• 

Environment settings (“Date and time” and “Console” settings are not included in backup data.)

1. 

Insert the USB media into the USB port of the controller.

2. 

Press [OTHER] and select [BACKUP].

3. 

Press [BACKUP].

4. 

Input the file name and press [SET]. 

This file name is displayed when selecting the backup data for 

restoring.

5. 

The backup data is saved in the USB media with the following folder structure.

USB media

“SUNX_BACKUP” folder

Folder (can be renamed)

“BACKUP” folder
BACKUP.LOG
BKUP. INI

Notice

• 

Do not change the folder structure of the backup data. Changing or deleting data in the backup might be a cause of 
the reading error.

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Отзывы:

Нет отзывов