manualshive.com logo in svg

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 110 / 308

Поделиться
Скачать
Panasonic LP-M Series Скачать руководство пользователя страница 110

110

Description

3 

Setting Date and Time: 

Setting Items

Remarks

Year

Dominical year (standard)

WB-year
(week-based year)

Dominical year based on the week number. According to the week number, the date of 
the end or start of the year may belong to the last or next year.

Era Year
Month
Day

AM/PM

Time in forenoon and afternoon. From 0:00:00 A.M. to 11:59:59 A.M. are displayed with 
“AM”, and from 0:00:00 P.M. to 11:59:59 P.M. are displayed with “PM”.

Hour (24)

Time in 24 hours to be displayed with 0 to 23.

Hour (12)

Time in 12 hours to be displayed with 0 to 11.

Minute

Displayed with 0 to 59.

Second

Displayed with 0 to 59.

Week
365 Days

“1” indicates January 1, and “365” indicates December 31 (for normal year).

Reference

•  When week or WB-year (week-based year) is used for the date marking, set the update day and first week of the year 

in environment settings screen beforehand. Refer to “Week Setting” (P.231).

4 

Zero Indication:

Setting Range 

Zero Fill

:

Marks value in right-justified, and mark “0” to the left.

R. Justify

:

Marks value in right-justified, and blanks (space) left column.

L. Justify

:

Marks value in left-justified, and blanks (space) right column.

Justify

:

Marks only value in left-justified.

Display in the marking character field of the current date and expiry date function

%0N:Xn 

 

: Date and time with Zero Fill

%_N:Xn 

 

: Date and time without Zero Fill right stop (the underscore (_) represents a space.)

%N_:Xn 

 

: Date and time without Zero Fill left stop (the underscore (_) represents a space.)

%N-:Xn 

 

: Date and time without Zero Fill stop

%APM:n 

 

: Forenoon (AM)/Afternoon (PM)

Item

Displayed characters

Description

N

1 to 6

Represents the number of digits.

X

Unit of date and time

Y

Year

i

WB-year (week-based year)

y

Era year

M

Month

D

Date

H

Hour (24-hour time)

h

Hour (12-hour time)

m

Minute

s

Second

w

Week

J

365 Days

n

Type of date and time

0

Current date/time

1 to 4

Expiry No. 1 to Expiry No. 4

5 to 8

Common Expiry No. 5 to Common Expiry No. 8

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Отзывы:

Нет отзывов