manualshive.com logo in svg

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 176 / 308

Поделиться
Скачать
Panasonic LP-M Series Скачать руководство пользователя страница 176

176

2-10-5  Processing Condition

Reference

• 

For LP-M and LP-Z series, when the “3D” on the “2D/3D setting” of the common condition on for the general condition is 
checked ON, the processing function becomes invalid.

1

2

3

4

5

6

Description

1 

Proc. Cond. No. (Processing Condition No.) :

Specifies up to 16 processing condition per one registered file.

Setting Range 

0 to 15

2 

Dashed Line :
To input the dashed line, enable this function. Clearing the check box marks the setting data with solid line.

Solid (part of dashed line) :
When dashed line is set, input the length of the solid part of the dashed line.

Setting Range 

0.010 to 120.000 mm (LP-M500 / LP-Z130)*
0.010 to 90.000 mm (LP-S500)*

Blank (of dashed line) :
When dashed line is set, input the length of the blank of the dashed line.

Setting Range 

0.000 to 120.000 mm (LP-M500 / LP-Z130)*
0.000 to 90.000 mm (LP-S500)*

Solid part of dashed line

Blank of dashed line

3 

Processing Element :
Indicates the processing condition set at the laser setting.
Up to 32 processing elements can be set per one number of processing condition.

4 

INPUT :

Pressing INPUT button establishes the specified conditions.

5 

DELETE :
Pressing DELETE button deletes the selected processing condition.

6 

ALL DEL :
Pressing ALL DEL button deletes processing condition.

* 

For the setting range of the other model, refer to “Input Setting Value by Series” (P.296).

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Отзывы:

Нет отзывов