manualshive.com logo in svg

Panasonic LP-M Series, Руководство по эксплуатации, Страница: 156 / 308

Поделиться
Скачать
Panasonic LP-M Series Скачать руководство пользователя страница 156

156

Description

8 

X/Y Scale (only for VEC file format) :
Specifies the magnification of X/Y of the VEC file data.

Setting Range 

0.100 to 10.000 times

9 

Size (only for DXF file format) :
Specifies size specification method of DXF file data.
• 

Height/Width 

: Sets height and width respectively.

• Width (Keep Ratio) 

: Sets width with height ratio fixed.

• Height (Keep Ratio) 

: Sets height with width ratio fixed.

• Original 

: Sets DXF file size as original size.

10 

Height, Width (only for DXF file format) :
Sets height / width of DXF file data.

Setting Range 

0.100 to 120.000 mm (LP-M500 / LP-Z130)*
0.100 to 90.000 mm (LP-S500)*

11 

Font (only for DXF file format):
Specifies font type to be used for the text character in DXF file data.
The setting varies by pressing this field. The font can be selected for each logo file.

12 

Marking Pitch (only for DXF file format):
Sets marking pitch of the solid hatching drawing in DXF file data.

Setting Range 

0.010 to 2.000 mm

13 

Marking Direction (only for DXF file format) :
Sets marking direction of the solid hatching drawing in DXF file data. Both vertical and horizontal directions are 

settable.

14  Laser Power Correction :

Scan Speed Correction :
Laser Pulse Cycle Correction (Except LP-SxxxW type) :

Correction of each logo No. for the laser power / scan speed / laser pulse cycle set at laser setting.

Setting Range of Laser Power Correction

0 to 999%

Setting Range of Scan Speed Correction 

1 to 999%

Setting Range of Laser Pulse Cycle Correction

1 to 999%

Reference

• 

If the value of “Laser power correction” × “laser power” is equal to or larger than 100, the setting will be “100”.

• 

Marking is not available when the laser power correction value is “0”.

• 

If the corrected value exceeds the setting limit, the nearest upper or lower limit value of the each item is set.

15  Layer No. : 

•  When more than one condition of the marking data is set, layer No. specifies the marking order. 

 

The laser marker performs the marking with the smaller order of the layer No. specified beforehand (Layer 
No. 0 is firstly marked, and Layer No. 15 is marked finally.). Note that it is not applicable for the Step & Repeat 

marking. 

•  In marking connecting character to flying object, layer No. indicates the order of the marking field.
• 

When the 3D marking mode is selected (only for LP-M and LP-Z series), layer No. indicates in which work 
shape is set the condition of the marking data.

Setting Range 

0 to 15

* 

For the setting range of the other model, refer to “Input Setting Value by Series” (P.296).

ME-LPMSZ-OP-7

Содержание LP-M Series





















































































































































































































































































































Отзывы:

Нет отзывов