“slave 2” is added in lower right of “slave 1” if click “OK”
Initial asterisk (
＊
) of name means that it is not reflected to master unit. (2) after name means Unit
No. 2. Sharp (
＃
) indicates that terminal is not set. (After entering terminal,
＃
is cleared and after
completing transfer to master unit and transfer from master unit,
＊
is cleared.)
Upper slave works as repeater for lower slave.
In this case, “slave 1” has repeater function to “slave 2”.
In case of increasing repeater, repeat this procedures. Max. 8 repeaters can be added.
The slave added last is the objective slave (slave connected to terminal equipment).
Note
：
For 1:1 topology with repeaters, terminal registration is not necessary.
Transfer to Master Unit
(7) Above setting has not been reflected to master unit. In order to reflect to master unit,
execute “Transfer to Master Unit”.
Select “File”
→
”Transfer to Master Unit” in menu.
When the below dialog is displayed, click “OK”.
Below dialog is displayed during data communication.
In case of completing to transfer to master unit correctly, return to main window.
5-7
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]
Содержание KR20
Страница 1: ...Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net ...
Страница 4: ...Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net ...
Страница 10: ...1 6 Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net ...
Страница 117: ...9 1 Chapter 9 Specifications Phone 800 894 0412 Fax 888 723 4773 Web www ctiautomation net Email info ctiautomation net ...
