manualshive.com logo in svg

Panasonic 1M, Инструкции по эксплуатации, Страница: 62 / 134

Поделиться
Скачать
Panasonic 1M Скачать руководство пользователя страница 62

Touch            for the security system you wish to 
change on the Security Alarm Delay Screen, select 
one of "Off/60sec./120sec./300sec.", and touch

While Security is turned on (     pages 100 
to 101), the Security Alarm Delay Time 
cannot be changed. To change the Door 
Phone Sound, please first disarm Security.

Note

Note

Select one of "Voice/Imitation 
Sound/Off" and touch 

●

The sounds emitted from the Master and the Door Phone cannot be set individually. 

●

While Security is turned On (     pages 100 to 101), the "Security Off Sound" setting cannot be changed. 

  To change the Door Phone Sound, please first disarm Security.

If you make a mistake as you enter the number, 
touch              . This will clear all numbers.

Note

Note

Note

62

Touch

2

Touch 
any one

1

Touch

2

3

Security Off Sound Screen

Security Off Sound

2

3

3

2

Touch 
any one

1

Touch

2

Touch 
any one

1

3

Security Alarm Delay Screen

Security Alarm Delay

Touch 
any one

Enter the 4-digit security number 
using the keypad

Touch

The Security Number is now set. 
The display returns to the Setting Screen.

Write the entered security number in the 
security number field in page 48.

●

This can be set if the "Permit changes to delay setting" is set to "Yes" in Installation Setting.
(Please contact the store responsible for installation or the service and maintenance company.)

●

If the "Permit changes to delay setting" has been set to "No", the "Security Alarm Delay" display does not appear. 

60sec.

Off

120sec.

300sec.

Security comes on immediately after 
touching to turn on Security.

Security will come on about 60 seconds 
after touching to turn on Security.

Security will come on about 120 seconds 
after touching to turn on Security.

Security will come on about 300 seconds 
after touching to turn on Security.

Voice

Off

A message is played from the base unit. 
When Security is turned On: Security has been turned on.
When Door Closure Security is On: Bong, 
Check that all windows and doors are locked.
When Security is turned off: Security has been turned off.

No message or notification sound is emitted 
from the Master or Unit Entrance.

Imitation

Sound

factory
default

setting

A notification sound is emitted from the base unit.
When Security is turned ON: Long beep
When Door Closure Security is ON: Short beeps
When Security is disarmed: Beeps

Factory default setting

Security 1, Security 3, Security 4: Off
Security 2: 60 seconds

7.Windea̲取説（英語）̲1M.indd   62

7.Windea̲取説（英語）̲1M.indd   62

2012/09/06   17:03:39

2012/09/06   17:03:39

Содержание 1M







































































































































Отзывы:

Нет отзывов