manualshive.com logo in svg

Panasonic 1M, Инструкции по эксплуатации, Страница: 58 / 134

Поделиться
Скачать
Panasonic 1M Скачать руководство пользователя страница 58

Continued on next page

After touching                         , record a 
message using the following procedure.

Touch         on the Away-from-home 
Message Screen

Select any of "Fixed 
Message 1/Fixed Message 
2/Recorded Message/
No Message", and 
touch

On the Not-home Setting Screen, 
touch         for the content you 
wish to set

58

Not-home Setting Screen

Setup screen

1

Touch

2

Touch

Not-home Setting

Away-from-home Message

Away-from-home Message Screen

1

1

2

3

Touch 

any one

1

Touch 
any one

Touch                on the Setting 
Screen

The Away-From-Home Setting screen is 
displayed. 
For how to start the settings, please see 
page 50.

Fixed message 2

Recorded 
Message

No Message

Please record a message. The recording time is about 15 seconds.

The Fixed Message cannot be changed.

Note

The Fixed Message cannot be changed.

Note

Note

"No one can answer at the moment."

"May I have your name please?"

●

For your own security, we would strongly advise you not to record 

a message which clearly indicates that you are out. 

●

Please record in a quiet environment. 

●

The volume of the recorded message from the Main Entrance and Unit 

Entrance will vary depending on the distance between the person 
making the recording and the Master. If the person's voice is too low, 
the message will be difficult hear. Too loud, and a crackling may occur.

No message is played.

Note

● 

If a call is made from the lobby phone, only automatic video 

recording is performed without answering. 

● 

If a call is made from the Manager Room or another unit, 

"Fixed Message 1" is played in response.

For details on each setting, please see below.

Touch to 
go to 2/2

Touch

2

Touch 
any one

1

Touch to go to 1/2

Touch

Fixed message 1

factory default 
setting

7.Windea̲取説（英語）̲1M.indd   58

7.Windea̲取説（英語）̲1M.indd   58

2012/09/06   17:03:38

2012/09/06   17:03:38

Содержание 1M







































































































































Отзывы:

Нет отзывов