manualshive.com logo in svg

Panasonic 1M, Инструкции по эксплуатации, Страница: 126 / 134

Поделиться
Скачать
Panasonic 1M Скачать руководство пользователя страница 126

126

Perform the following inspection and measures before asking for fixing and services.

Status

Inspection

The heat/gas detector abnormality occurred (wiring is disconnected).

Insecticide was not sprayed to the gas detector?

The gas leak alarm is not removed?

The power lamp of the gas detector is not turned off?

The push button is not left pressed?

When beep sound occurs (call)

Is the

  Brightness button  

adjusted properly?

The call volume is not set to low or medium?

When images are blurred

When the call volume is too low

When a call is interrupted

When a call is unidirectional
When a call is noisy

You are not using too much electricity?

A gas/kerosene stove is not used under the detector?

The detector is not exposed to spray-type detergent?

A window/door is not left open?

The breaker has not tripped?

Do not function at all

"(siren sound) The fire detector has been activated. 
Please check."
When a message is played (Fire detector activated alarm)

"(siren) Warning, fire, fire. Warning, fire, fire. A fire has 
broken out. Please evacuate the premises in a safe 
manner. (siren)"
When a message is played (fire alarm)

"(rapid beep sound) Gas Leak."
When a message is played (emergency alarm)

●

A large amount of smoke/steam is not created by cooking 
fish/meat? 

●

Insecticide that emits a large amount of gas is not used?

The gas detector may be activated by alcoholic drink. 
Alcoholic moisture is not generated by sweet cooking rice 
wine, soy sauce, or bottles of alcoholic drink?

"(beep sound) The air is contaminated. Please open a 
window and ventilate the room." 
When a message is played (imperfect combustion(CO) alarm)

Imperfect combustion did not occur when fire up or 
extinguish a kerosene stove?

When beep sound occurs
(Fire Detector Fault Alarm)
(Gas Detector Fault Alarm)

"(pee-paw, pee-paw, pee-paw) Emergency."
When a message is played (emergency alarm)

"(beep) Security is operating."
When a message is played (security preliminary alarm)

"(siren) Security alarm has activated."
When a message is played (security alarm)

"(siren sound) Please come immediately."
When a message is played (emergency call alarm)

"(beeps) Too much electricity is being used."
When a message is played (over-current alarm)

The emergency button or an expanded emergency button 
is not left pressed on the base unit?

When you come home and find the periphery of the 
MENU button flashing in blue

There is no recorded messages/message or deliveries 
from the manager room?

A big sound is not generated around the base unit, the 
lobby phone, the handset of the door phone or the handset 
of the door phone with camera?

●

When audio/video is degenerated 

●

When a black screen is displayed during playback of 
recorded videos 

●

If the playback screen of recorded videos are degenerated

There is no high-output wireless station or something emits 
strong magnetism?

7.Windea̲取説（英語）̲1M.indd   126

7.Windea̲取説（英語）̲1M.indd   126

2012/09/06   17:03:58

2012/09/06   17:03:58

Содержание 1M







































































































































Отзывы:

Нет отзывов