Panasonic 1M Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 134

Panasonic 1M Скачать руководство пользователя страница 6

◎

Safety Precautions - Warnings

C

6

Always Observe

Always observe the following precautions in order to prevent harm to people and damage to property.

Always Observe

B

C

C

C

1

2

3
4
5

6

7

8

9

WARNING

DANGER

CAUTION

These items are prohibited.

These items must be performed.

Precautions which may cause death or serious injury.

Precautions which may cause injury or damage to property.

Risk of serious injury or death.

■

The following symbols indicate the type of precautions that must be obeyed. (The following are examples of symbols.)

■

Precautionary information is classified and described according to the level of
hazard and damage that may occur as the result of incorrect operation.

●
●

●

●

●

●

●

●

●

●

Do Not Touch

Do Not Touch

Prohibited

Do Not Disassemble

DANGER

WARNING

Prohibited

CAUTION

Do not touch any switches on electrical devices, such as ventilation fans, electric
fans, and lighting equipment, if there is a gas leak alarm.

Sparks may cause an explosion.

Do not under any circumstances touch the liquid inside the liquid-crystal panel if it has broken.

Skin inflammation may result. If it got into the mouth, gargle immediately and consult a doctor.
If it got into the eyes or adhered to the skin, wash with clean water for at least 15 minutes, and
consult a doctor.

Do not touch the base unit with a wet hand, put it in water or splash water on it.

Electric shock or failure may result

.

Do not place an SD memory card within the reach of infants.

Accidental ingestion may occur. In case of accidental ingestion, consult a doctor
immediately.

Do not under any circumstances disassemble, repair, or modify the product.

Electric shock may result.

Secure your footing when placing a cover such as a plastic bag on a gas alarm or smoke
detector to use insecticides (smoking pesticides and thermal transpiration pesticides).

Always observe this item for safe operation because this task is performed in high places
and may cause accidental falls.

Do not exert excessive force on the liquid-crystal panel or subject it to high impact.

The liquid-crystal panel may break, causing injury.

Do not put your ear close to the speaker.

Because a large sound is suddenly generated, it may cause a hearing problem.

7.Windea̲取説（英語）̲1M.indd 6

7.Windea̲取説（英語）̲1M.indd 6

2012/09/06 17:03:27

2012/09/06 17:03:27

«
...
4
5
6
7
8
...
»

Содержание 1M







































































































































Отзывы:

Нет отзывов